Sun Shelf, Tanning Ledge or Beach Entry: Which Fits Your Pool?
A sun shelf and a tanning ledge are the same flat, shallow platform under two names. A beach entry is a slope that starts at deck level. The choice is about how much of your pool you are willing to make shallow, and it is fixed when the shell is shot.

A sun shelf and a tanning ledge are the same thing: a flat, shallow platform inside the pool where loungers stand in a few inches of water. A beach entry is a slope from deck level into the pool. A shelf takes a strip of the pool; a beach entry takes far more. Both are cast with the shell.
That makes this a layout decision, made before excavation, not an accessory. It is one of the design directions in our ten luxury pool designs for Florida homes; this guide goes into how much space and depth each option asks for.
The three options at a glance
| Sun shelf / tanning ledge | Beach entry (zero entry) | |
|---|---|---|
| What it is | A flat, shallow platform inside the pool, one step down from the deck | A floor that slopes from deck level into deeper water |
| What it is for | Loungers in the water, children playing, sitting in the shoulder months | Walking in gradually, small children, a resort look |
| How much of the pool it uses | A strip along one side or end | A long ramp, because the slope starts at zero depth |
| When it is decided | In the engineered plan, before the shell is shot | Same |
| How our estimator prices it | As pool area, at the same rate per square foot as the rest of the water | Same |
The names cause most of the confusion. "Sun shelf", "tanning ledge", "Baja shelf" and "lounge ledge" are trade names for one feature. "Beach entry", "zero entry" and "zero-depth entry" are names for the other. When two quotes use different words, check the drawing, not the label.
Is a sun shelf the same as a tanning ledge?
Yes. Both describe a flat platform built into the shell at shallow depth, usually at the entry or along one side. It is wide enough for one or more in-water loungers, an umbrella sleeve, and often a bubbler.
What makes one shelf better than another is not the name but three decisions that are only cheap while the pool is a drawing:
- The depth. It is set so the loungers you intend to use stand level with the water where you want it. Check the chair maker's specified water depth before the shell is engineered, not after.
- The size. It has to fit the number of chairs you will really use, plus room to step around them. A shelf sized for two loungers does not take three.
- The direction. In most Florida yards, the shelf should face where people want to sit in the late afternoon. We cover orientation in what makes a pool look custom.

The photo above is the reason this is a design decision and not an accessory. The shallow platform in the foreground is part of the concrete shell, shot with the walls. Bubbler plumbing and umbrella sleeves go in before that concrete is placed. Our guide to upgrades worth planning before construction lists what closes when the shell does.
What is a beach entry pool?
A beach entry replaces the steps, or part of them, with a sloped floor that rises to meet the deck. You walk in the way you would at a beach. It is the most accessible way into a pool for small children and for anyone who finds steps awkward. It also reads as a resort feature.
The cost of a beach entry is space. Because the slope begins at zero depth, the pool needs a long run before the water is deep enough to swim. On a large pool that run is a feature. On a small pool it can turn a meaningful part of the water into a ramp.
Two consequences to plan for:
- The finish is seen up close and walked on. A beach entry is the part of the interior finish that people stand on in a few inches of water. How plaster, quartz and pebble feel underfoot is covered in our comparison of pool finishes.
- The water edge is at deck level. A small child can walk straight in. That makes the barrier around the pool more important, not less. The rules a new Florida pool has to meet before it is filled are in Florida pool barrier requirements.
How much of the pool does each one use?
A shelf uses a strip. A beach entry uses a ramp. Either way, the shallow area is still pool, and it is priced and permitted as pool.
That matters because shallow water is the part of a pool you sit in, not the part you swim in. Before deciding, sketch the pool at its real size and shade the shallow area. If what is left is too short to swim, the answer is a larger pool or a smaller shelf, not a different name for the shelf. Our guide to what size pool you need explains how to size the water you will actually use.

What does a sun shelf add to the price?
In our pool cost estimator, a shelf or a beach entry is not a separate line. It is pool area, and the estimator prices pool area per square foot of water, by style, before the interior finish multiplier and the permit line are applied.
So the useful question is how much area the shelf adds. On the estimator's default configuration (a 450-square-foot freeform pool with a pebble finish and a 600-square-foot paver deck), the numbers work out like this:
| Pool style in the estimator | Added cost per extra square foot of water, including the 9% permit line |
|---|---|
| Standard | about $107 |
| Freeform | about $138 |
| Luxury | about $182 |
On the freeform default, enlarging the pool by 50 square feet to fit a shelf adds about $6,900, and by 100 square feet about $13,800. If the shelf fits inside the pool you already planned, it moves water from the swimming area to the shallow area and the price barely changes. What changes is how you use the pool.
Every figure here comes from the same approved price table the estimator uses. It returns a range of plus or minus 10 percent, not a quote. Plumbing for bubblers and umbrella sleeves is not in that table. Ask for it as a separate line in the proposal.
What does the Florida code say about entries?
Two parts of the Florida Building Code, Residential (8th Edition, 2023) apply directly:
- R4501.6.1 requires residential pools to be designed and built in conformity with the ANSI/APSP/ICC standards it lists, including ANSI/APSP/ICC 5 for residential inground pools. Those are the Pool & Hot Tub Alliance standards. Shelves and slopes are designed to them like the rest of the shell.
- R4501.18 requires a ladder or steps in the shallow end where the water depth exceeds 24 inches. In private pools deeper than 5 feet, the deep end needs ladders, stairs or underwater benches or swimouts.
A shelf or a beach entry does not, by itself, remove that requirement. The plan has to show how a person gets in and out where the code says they must. That is a question for the engineered drawings, and it is easier to settle there than at inspection.
Which one fits your pool?
| If you want… | Choose |
|---|---|
| Loungers in the water and a place to sit with a drink | A sun shelf sized to the chairs you will actually buy |
| Small children to play in shallow water near the steps | A sun shelf at the entry |
| The gentlest possible way in, and the pool is large | A beach entry |
| The most swimming length from a small pool | Corner steps, and a bench instead of a shelf |
| A shelf on an existing pool | A remodel that rebuilds part of the shell, not an add-on |

The photo above is the last row of that table in practice: a curved shelf on an existing pool, broken back to its base and refinished during a remodel while the rest of the pool was still waiting for its new surface.
In Gainesville and Ocala
The swim season in North Central Florida is shorter than at the coast, and the shoulder months are when a shelf earns its space. Shallow water warms sooner than the deep end, and a lounger in a few inches of water is how many families use a pool in spring and fall. What changes in this region, from the limestone under the yard to the well that may fill the pool, is in building a pool in North Florida.
On larger lots, a full-width shelf is common. Our estate pool and spa with a sun shelf is a geometric pool on open acreage in North Florida with a full-width shelf and a raised spa. Our pages for pool builders in Gainesville and for building a pool in Ocala and Marion County explain how a design like that moves from 3D model to permit. Our custom pool construction page covers the whole region.
Price the shallow area before you draw it
The quickest way to see what a shelf costs is to change the pool size in our pool cost estimator by the area you want to make shallow, and compare the two ranges.
Common questions
What is the difference between a sun shelf and a tanning ledge?
Nothing structural. Both names describe a flat, shallow platform inside the pool, deep enough to keep a lounger's base in the water and shallow enough to sit or lie on. Builders and brochures use the two terms interchangeably.
What is a beach entry pool?
A pool where part of the floor slopes gradually up to meet the deck, so you walk into the water the way you would at a beach instead of using steps. It is also called a zero-entry or zero-depth entry. Because the slope starts at deck level, it takes more of the pool's area than a shelf does.
Can you add a sun shelf to an existing pool?
Sometimes, but not as an add-on. A shelf is part of the concrete shell, so adding one to an existing gunite pool means building new structure inside the old one during a remodel, with its own engineering, permit and new interior finish. On a new pool it is drawn in from the start.
Does a sun shelf or beach entry replace the pool steps?
Not automatically. The Florida Building Code requires a ladder or steps in the shallow end where the water is deeper than 24 inches. Ask your designer to show on the plan how the shelf or the beach entry and the required steps work together.
Sources
- Florida Building Code, Residential, 8th Edition (2023), R4501.6.1 Conformance Standard (ANSI/APSP/ICC 5) — via UpCodes
- Florida Building Code, Residential, 8th Edition (2023), R4501.18 Ladders and Steps — via UpCodes
- Pool & Hot Tub Alliance — PHTA Standards (ANSI/APSP/ICC-5, residential inground pools)
- Mr & Mrs Outdoor Living — Pool Cost Estimator (price per square foot of pool, finish multipliers)
About the author
Robert Wesley Brannen is the co-founder of Mr. & Mrs. Outdoor Living and a Florida-certified pool and spa contractor. Having started in his family's aluminum business at age 13 and previously led Happy House Outdoor Living, Robert brings extensive experience in custom pool construction, outdoor structures, and design-build project management.
Florida Licenses: CPC1460562 · CPC1461119 · SCC131153553.
Most Read Articles

10 Pool Upgrades Worth Planning Before Construction Begins
The options list on a pool proposal looks like one decision about money. It is really three decisions about timing: what closes at the shell, what needs something buried, and what can wait.Read More: 10 Pool Upgrades Worth Planning Before Construction Begins
What Makes a Pool Look Custom? 9 Design Choices That Transform the Backyard
The choices that make a pool look custom are mostly early, mostly cheap, and mostly decided on the layout drawing. The ones that cost the most show the least. Here are the nine, in the order they get locked.Read More: What Makes a Pool Look Custom? 9 Design Choices That Transform the Backyard
Planning Water Features and Lighting in a New Pool: What to Decide Before the Shell
Water features are plumbing and pumps; pool lights are niches, conduit and bonding. In Florida all of it is inspected before the concrete is placed, so the decisions that matter are made on paper, before the shell, not when the pool is full.Read More: Planning Water Features and Lighting in a New Pool: What to Decide Before the Shell
Request a Design-Build Project Evaluation
Share your property details, project scope, and investment range. Our licensed design-build pool builders will review your request and confirm alignment before next steps.
Get a Free Estimate